Chinoiserie Inspired Bamboo Nightstands

This week, we finished our bamboo project ... nightstands! Ever since we made the grasscloth + nailhead feature wall, Ive wanted simple, open nightstands that wouldnt hide too much of the nailhead.

Ive been playing around with a few options, but once I found the Skubb drawer at Ikea and thick bamboo on clearance at a local craft store, I was excited to get started! The plan included, a simple top that was built to fit around the drawer with bamboo legs for the base.

This project is a perfect example of how David and I work together ... he loved the idea of a box built to fit a fabric drawer, but the bamboo legs, not so much. I saw the bamboo and instantly thought theyd be perfect for legs (painted of course...) because theyre different from standard lumber, add detail and cheap! David saw them and recognized that hollow = more difficult to attach and work with. 

David wasnt sure, but as usual, he was up to the challenge! We made our way to checkout ... $10 total for both nightstand bases!

Lets get started! 

First, below are the basic materials that we used to make the nightstands. Read on to see how we did it! 

After drawing up a plan, we made a box to fit around the drawer out of MDF. Prior to assembling the box we painted the inside while it was easy to access. 

First, we worked on the bamboo. We looked at the sections before we cut and for the most part, they were pretty straight. Prior to attaching them, we rotated them so that it would look as straight as possible.

Since they were hollow, we would need to put something inside so that the legs could securely attach to the top. After a little trial and error, we came up with cutting an insert out of a 2x2. Since all of the bamboo is different, we dipped the ends in paint as a guide and then cut it out with the jigsaw.

We then drilled through the 2x2 to insert a dowel rod (long enough to fit through the MDF as well). Prior to installing the dowel rod we put Gorilla Glue on the rod so that it would be extra strong. 

Then we inserted the entire piece into the bamboo leg using Gorilla Glue again. Finally, we inserted the leg into the top, using, you guessed it, Gorilla Glue. We decided to use Gorilla Glue because it is strong and expands into crevices once dry. 

I also drew a little diagram cutting through the nightstand to help explain. 

For the X on the bottom, we measured, and marked where they would go. Drilled a large hole, and then widened it to fit the curve of the bamboo with a cutting attachment on the dremel. The top piece of the X sits in the bottom, so we cut the bottom piece a little so it would sit. Finally, we used more Gorilla Glue to secure it. We used clamps throughout, so that it would bond tightly.

Since we were using something organic, a lot of pieces had to be custom fit to the shape of the bamboo.  Those steps could have been eliminated if we used pre cut lumber. Clearly we like to challenge ourselves ... sometimes yes, but actually we didnt know it would require this much customization when we started. Im so glad that it turned out like I had envisioned in the end!

After it was built, I thought it looked a little skimpy/cheap at the top ... We used a little left over molding (cut at 45s and attached it with Epoxy) to add a little extra dimension and visual weight on top. Plus its perfect so that things dont roll off of it! 

Prior to painting, we filled any cracks in the bamboo with wood filler and once dry, sanded. 

I primed it with Zinsser Cover Stain (two coats) and finished it with Sherwin Williams Pro Classic, Alabaster (two coats). 

Now onto my favorite part - the drawers! We used the Skubb drawer from Ikea with a fabric wrapped 1/8" piece of luan. First we measured and drilled where we wanted the panel to attach to the drawer. I wrapped it like the Rast dresser. Then I cut and sewed a loop on the front for the pull, and went through the pre-drilled holes with upholstery thread and a long needle (about 4 times per section). 

We decided to make the drawer fit snuggly so that it wouldnt fall out easily. I LOVE the organization thats included! It took about 30 seconds to put together too - since the organization is sewn into place. Also, its soft on the bottom, so I dont have to worry about it scuffing the paint.

You can see the detail of the attached panel a little better in the photo below. 

A few weeks ago we installed the guest room chandelier in our room. I love the soft light that it puts off. 

This the best straight on shot I can get since its tight in front of the bed ... maybe Ill get a wide angle lens soon (any suggestions for a Nikon?) 

Love the added detail that the molding adds. I think it really helps to dress up the MDF. 

I picked up a candle from Targets fabulous selection (so many great ones to choose from!) Target is SO good recently! 

We could also put a basket on the bottom if we need extra storage, but for now were good! Also, to hide the lamp wire, I used painters tape to secure it on the back and then run it down the far leg. Ive also seen a few tables using little 3M wire hooks too.

I swapped the organic chevron duvet for a lighter weight white coverlet for the summer (from TJ Maxx).

Cost Breakdown + Sources:

MDF: Habitat ReStore (left over from open shelving unit)
Bamboo: Beverlys (local craft store) $3 for each 8 pole (3 total), .50 small bamboo (2 total)
Zinsser Cover Stain Primer: Home Depot
Sherwin William Pro Classic Paint Alabaster
Skubb Storage Drawers: Ikea, $8 each
Fabric: World Market kitchen towel $4
Coral Striped Runner: Target

I had the paint and glue on hand so the total cost of the new parts was $30 or $15 each!

This is the last project for the bedroom, since we started redoing it in March, so Ill be giving a little tour of the projects soon!